
1] Lead Lined Radiation Barriers
Mobile lead lined screens are used to provide protective shielding to the personnel in the work area where radiography work is in progress. The screens are provided with castors to move them around at the work place or at site. Mobile Screens can be used as shielding on all side around the radiography work area to protect workers from stray radiation. The screens are made of MS framework with lead lining of 1.00mm and covered from both sides by MS Sheet. Available with and without Lead Glass window.
WIDTH: 750 mm, 1000 mm, 1200 mm
HEIGHT: 1800 mm, 1800 mm, 1800 mm



2)PERSONAL PROTECTION ITEMS
Advisable to wear in high radiation area or in compact and closed work areas.
1] Lead lined apron (Coat type)
2] Lead line gloves
3] Lead line gonad shield
4] Lead glass goggles

3. LEAD POT
Lead container used for storing the radioactive source pencil / pig tail, accidentally left out of the projector. Made as per Special design recommended by BARC.
Specifications
1. Lead Pot- 12HVL for 40 curies of Ir 192
Lead Walls, Cover, and Bottom: 65 mm from side wall
Cavity: 12mm Diameter x 109mm Deep
Overall Size: 19cm Diameter x 31cm Height
Weight: 21kgs Exterior & Interior Finish: Enamel Paint.
2. Lead Pot- 15 HVL for 100 curies of Ir 192
Lead Walls, Cover, and Bottom: 65 mm from side wall
Cavity: 12mm Diameter x 109mm Deep
Overall Size: 22cm Diameter x 36cm Height Weight: 35 kgs Exterior & Interior Finish: Enamel Paint.

4] REMOTE HANDLING CEE VEE TONGS
Made of stainless steel for picking up unshielded radioactive source Pencil/source holder.
1] Length 1.0 mtr
2] Length 1.5 mtr
3] Length 2.0 mtr
5] LEAD SHOTS

5] LEAD SHOTS
The Exposure Lead Shot Bag is an essential piece of gear for every radiographer in a source retrieval situation. .
Size available ( 2 mm to 4 mm mix.) : Bags of 1 Kg., 2 Kgs. 5 Kgs. or as per order.


5.Collimeters- Collimators are essential component of Industrial Radiography set up as they provide radiation safety to the operating personnel and general public at large by directing the emerging radiation beam to the useful area of exposure.
It is also helps in reducing the scattered radiation which is turn results in radiographs with better sensitivity. Considering the above factors, tungsten collimators with light weight and compact design suitable for directional and panoramic type of exposures.
Features
Shielding material Tungsten alloy
Density 17.2 to 17.6 gm/cc
Half value layer for Ir.192 3.4 mm
Tenth value layer for Ir.192 11.22 mm
Intensity reduction 95% at the shielded areas
Directional Collimator For unidirectional exposures
Panoramic Collimator For Panoramic exposures