- Hole Type Penetrameters ASTM E 1025
- Hole Type Penetrameters ASTM E 1742
- ASTM E747 Wiretype IQI
- E462-1/ISO19232 Wire Type IQI
- Duplex Penetrameters ISO 19232-5/EN462-5/ASTM E2002-99
- IQI As per EN462-2
- 7.5-Groove Wedge According to ASTM E2737
- DR Phantom TAM for Aviation
- Duplex Plate Phantom.
- NDT Convergent Line Pair Penetrameters.
- Mounting blocks
- CR Phantom

ASTM E747 Wire IQI
ASTM E747-84a and ASME SE747-97a wire type penetrameters consist of a series of six parallel wires of diferent thicknesses, 25 or 50mm long, encapsulated between two thin sheets of transparant, flexible PVC. Lead characters identify the thickness of the thickest wire and material group. The letters ASTM are also included.
Hole Sizes
Small Hole Diameter | 1 x Thickness (min 0.10”) |
Medium Hole Diameter | 2 x Thickness (min 0.20”) |
Large Hole Diameter | 4 x Thickness (min 0.40”) |
Penetrameter Size Range
ASTM Material Classification | |||
Set | Material
Group |
Material | Specimen Thickness Range to ASME V |
A | Group01
Group02 1 2 4 |
Titanium
Aluminium Stainless Steel Inconel Copper |
4mm – 12.5mm |
B | 1
2 1 3 4 |
Titanium
Aluminium Stainless Steel Inconel Copper |
12.5mm – 40.5mm |
C | 2
1 4 |
Aluminium
Stainless Steel Copper |
40.5 – 125mm |
D | 1 | Stainless Steel | 125 – 400mm |
Set A, Set B & Set C : available wire lengths 25mm & 50mm
Set D : available wire length 50mm
A “Certificate of Conformity” is available for each penetrameter set.