
1.STAINLESS STEEL TANKS
All x-ray film processing tanks are made of SS316 corrosion resistant Stainless Steel Sheets and all joints are TIG welded.
Sizes Avilable
5 Galon – 13.5 Liters
10 Galon – 22.5 Liters
15 Galon- 40 Litres
20 Galon – 55 Litres
Capacity | Size [mm] |
13.5 Liters ( 3 Gal.) | 75 X 380 X 500 mm |
22.5 Liters ( 5 Gal.) | 125 X 380 X 500 mm |
45.0 Liters (10 Gal.) | 250 X 380 X 500 mm |

“2. X RAY FILM PROCESSING STAINLESS STEEL TANKS [TYPE 3 in 1]
Stainless steel Master with 2 nos. Stainless Steel processing tanks [One each for Developer & Fixer]. Additional space provided for washing the films. The master tank is fitted with Inlet and Overflow connections for running water for film washing. All tanks are made of SS 316 corrosion resistant stainless Steel. All tanks are having TIG welded joints. The inner processing tanks are available in capacities 13.5 Liters and 22.5 Liters.
A] System with 2 nos. 13.5 liters Processing tanks : PT 135
Master tank size: 400 mm Width x 480 Depth x 550mm Height (16”x 19”x22”)
B] System with 2 nos. 22.5 liters Processing tanks : PT: 225
Master tank size: 500 mm Width x 480 Depth x 550mm Height (20”x 19”x22”)”

“3. HANGERS [CHANNEL TYPE ]
CHANNEL TYPE HANGERS
STYLE : SINGLE, SINGLE, 2 IN 1, 3 IN 1, 4 IN 1, 3 IN 1, 4 IN 1, 3 IN 1, 3 IN 1
SIZE [cm] : 35 X 43, 30 X 40, 15 X 40, 10 X 40, 7.5 X 40, 10 X 20, 7.5 X 20, 10 X 12, 7.5 X 12
SIZE [Inches] : 14 X 17, 12 X 15, 6 X 15, 4 X 15, 3 X 15, 4 X 7.5, 3 X 7.5, 4.5 X 17, 3.5 X 17
”
” 4. .S.S. HANGERS [CLIP TYPE ]
• X-Ray Hanger 8×10
• X-Ray Hanger 10×12
• X-Ray Hanger 12×15
• X-Ray Hanger 12×16
• X-Ray Hanger 14×17
“


4 STAINLESS STEEL SPOOLS FOR PROCESSING ROLL FILMS
Available sizes
60mm x 3 meter
70mm x 3 meter
70mm x 5 meter
100 mm x 3 meter
100 mm x 5 meter

5.DARK ROOM TIMER
DARK ROOM ALARM TIMER
A timer is what controls how long the exposure will be. A timer can be something as simple as a watch digital timer. Timers can be analog or digital. The digital timers are much more accurate. A digital timer usually reads out in LEDs
Totaltime read out 999 sec. You can set time as per your requirement by SET and SHIFT key on the control panel


6. DARKROOM SAFE LIGHT
The Dark Room Safelight is fabricated in our fully equipped facility and by using high-grade components. We are capable of customizing the size of Safelight to address customer’s demand. Our Darkroom Safelight is an ideal and necessary dark room equipment and can be availed at extremely minimal rates.
- It provides the required brightness illumination while remaining ‘safe’ under darkroom conditions.
- Adjustable & can be fit into any mounting position.
- Size 8” x 10”

ID PRINTER FOR XRAY FILM
Automatic — The one-time exposure adjustment is designed to suit processing variations. It will supply sharp images of job information from an ID card. A glow light indicates exposure is being made. The printer offers easy adjustment for any type of film.

SPIDER (Source Positioning Device):-
We manufacture the centering devices which are intended to use as mechanical positioning assistance for gamma radiography sources in pipes. The spring pressure of the arms is adjustable. As complementary accessoiry an appropriately long source terminal is needed, corresponging to the type of gamma ray projector which is used. The source terminal can simply be slide through the centering device and be locked by the centre screw.
Centering device 1.0
for pipes 90 – 310 mm ID
(3.5″ – 12″)
Centering device 1.1
for pipes 105 – 420 mm ID
(4″ – 16″)
Centering device 1.2
Short version, 340 mm in length
for pipes 90 – 318 mm ID
(3.5″ – 12.5″)
